Forum Replies Created
-
AuthorPosts
-
[reserved] 😯

@Sargon wrote:
so now i have to expose my ignorance. having trouble with the plug in. how do you save that?
happens to me too. I just save it to my documents folder, then copy or cut and paste into the program folder located at: C:Program Files (x86)Advanced Combat Tracker
Be sure to save the file with a .cs file extension. .cs
v2011 – This is the recommended version with good NPC-handling for PVP situations (using improvements by Pirye@ucalegon). Attention: this version has slightly incorrect accuracy values and incorrect crit hit rates .
v1050 – This is the last version that had raw damage parsing. Accuracy and crit chance are correct.
An analysis of the differences is needed… :geek:
@mrbruce1970 wrote:
Turbine used Pando as well, and it’s well documented that it causes some issues for some users. I didn’t know STO used it otherwise I would have suggested removing it.
Thanks… Im just glad I got back in before I was having more serious withdrawl

Don’t know if I am totally out of the woods yet but so far, almost 4 hours and no problems.
I ran across a post about the Pando Media Booster. Apparently, Cryptic has used this P2P program to distribute updates embedded in the patch which in my book is a violation of my personal network security but that’s beside the point. PMB apparently remains running after a patch and can cause problems as it continues to poll for updates. I uninstalled the program ‘Pando Media Booster’ and did a Ctrl+Alt+Del to bring up running processes and killed pmb.exe. Why this still loaded after a reboot I don’t know but I will be checking for it in subsequent patches.
This ‘may’ not be what solved my problem however for I was trying any and all ‘fixes’ I’d found including making sure my router had port forwarding enabled for TCP/UDP ports 80,443, 7000-7500. I’m also using the US proxy without a problem.
So, for now, I am happy with the performance. Wish me luck for continued success
I’ve satisfied my STO fix and I am no longer suffering withdrawl.
Still not able to play. No response from PWE though others with this problem have and still cannot play. Finally got connected just now but still not pulling data for assignments, etc. so not working.
TS Isaac went through Florida Keys yesterday and I am still dealing with outer squall lines in eastern FL mainland. Have only lost power once though early this morning but we are getting hammered at the moment. No worries though, been through much worse, full blown hurricanes: Goerges in ’98 and Jeanne and Francis in ’05 so this is a cakewalk for me. 🙄
Wish I had solutions for you, I’ve been out of commission since last Thur. I’ve had no response from PWE to my ticket as have countless others.
What kind of problem is it giving you? Similar to my thread here? http://startrek.44thfleet.com/forum/index.php?f=5&t=356&rb_v=viewtopic
Somewhat better today as I am able to get on but still having hiccups of the rubberbanding and messed up data. At least by doffs are caught up on both toons though my dil ore reserve has shrunk by 16k since I haven’t been farming. I won;t consider it resolved until I go a full day without any problems and until then I prolly won’t do many missions, don’t want to stick anyone with a leaver… :/ Stay tuned campers!
Update: Still having problems but was able to get a little done today. Maybe tomorrow will be better. Will keep trying, have done all I can.
@CodeWarrior316 wrote:
What kind of internet provider do you have and are you hard wired into router or to the modem? Are you getting any packet loss? Sounds to me like your provider has some issues.
try from the cmd prompt:
ping patchserver.crypticstudios.com -t
for a few mins and that will let you know about packets being lost.
That went fine.
30 or so lines, all 70-72ms 46 TTL@Beta wrote:
Have you tried this?
Sporadic ISP Issue Fix:
The below is not guaranteed to work but might help solve some issues with your ISP. Using the Post Office analogy, this is like getting a new address and having mail delivered there.
Renew IP AddressGo to Start Menu
Search for cmd
Right-click and “Run as Administrator”
Type the following: ipconfig /release
Hit Enter
Now, type ipconfig /renew
Hit EnterThis will only work if you are using DHCP to assign local IP/DNS/Gateway. My entire network does not use DHCP and all local IP/DNS/Gateway are assigned manually and are always static. This is done so I can tightly control what machines/devices are allowed to access my net. Thanks for the input though:)
I have been doing some speed testing today and am finding all speed tests to SanFrancisco/Seattle are having problems with both d/u speeds if they don’t drop all packets period. Best U/l speed to SF today was 0.1 Mbps where I am paying for 1.5 which is enough to stream decent quality video to JTV. Of course best speed all around goes to Washington DC, getting 2x what is paid for… There’s a conspiracy theory in there somewhere… 🙂
I’ve considered getting on the phone with ATT but my blood pressure is fine today and I’d like to keep it that way. Trying to get someone there who actually IS a tech person and knows what I’m trying to tell them is a remote venture at best.
So, my conclusion is: it isn’t me or PWE and possibly ATT as it may be a new route or a temporary one if a server somewhere failed and is on a failover route. So for now, I’m stuck in spacedock.
Oh, and my gaming machine is hardwired, not wireless though I could use my 300n router.
Duplicate post from STO forum (http://sto-forum.perfectworld.com/showthread.php?t=225155&page=21):
Connectivity problems started with latest patch. Have reinstalled client, reset network equipment (all my machine IP’s etc. are always manually set), verified all drivers and firmware, disabled A/V, tried with US/EU proxy, force verify and other launcher options, minimal graphic settings. I am certain my PC isn’t the problem as evidenced below, which is a typical result each time I run these.
I will check back here as even if I check to be notified by email I never get any when there is a reply on this forum. (Broken? Why am I not surprised)
:mad::mad::mad::mad:
TRACERT
Tracing route to patchserver.crypticstudios.com [208.95.185.41]
over a maximum of 30 hops:1 1 ms <1 ms <1 ms homeportal [192.168.1.254]
2 28 ms 24 ms 23 ms 108-72-196-2.lightspeed.wepbfl.sbcglobal.net [10
8.72.196.2]
3 35 ms 27 ms 28 ms 99.128.141.32
4 * * * Request timed out.
5 * * 90 ms 99.128.141.8
6 85 ms 75 ms 63 ms 70.159.201.246
7 132 ms 118 ms 71 ms 12.81.8.88
8 128 ms 110 ms 142 ms 12.81.8.63
9 34 ms 191 ms 188 ms 74.175.192.166
10 169 ms 214 ms 187 ms cr81.fldfl.ip.att.net [12.122.106.94]
11 215 ms 200 ms 219 ms cr2.ormfl.ip.att.net [12.122.1.45]
12 222 ms 203 ms 195 ms cr1.attga.ip.att.net [12.122.5.142]
13 337 ms 248 ms 210 ms attga02jt.ip.att.net [12.123.22.25]
14 362 ms 213 ms 422 ms te2-5.ccr01.atl02.atlas.cogentco.com [154.54.10.
69]
15 249 ms 228 ms 70 ms te0-3-0-3.ccr21.atl01.atlas.cogentco.com [154.54
.83.181]
16 259 ms 274 ms 242 ms te0-1-0-6.ccr21.dca01.atlas.cogentco.com [154.54
.24.153]
17 186 ms 64 ms 242 ms te0-1-0-3.ccr21.jfk02.atlas.cogentco.com [154.54
.5.245]
18 295 ms 269 ms 284 ms te0-0-0-1.ccr22.bos01.atlas.cogentco.com [154.54
.25.114]
19 300 ms 108 ms 281 ms te3-2.ccr01.bos06.atlas.cogentco.com [154.54.46.
130]
20 104 ms 215 ms 323 ms 38.111.40.114
21 337 ms 315 ms 335 ms 208.95.185.41Trace complete.
NETTEST
contacting nettest server..
Local IP: 108.72.197.51
Ping: 107.2 msec
Port: 80: 87 KB/sec 179 KB/sec 105 KB/sec 500
Port: 80: 79 KB/sec 184 KB/sec 106 KB/sec 500
Port: 443: 127 KB/sec 188 KB/sec 165 KB/sec 500
Port: 443: 131 KB/sec 179 KB/sec 165 KB/sec 500
Port: 7255: 240 KB/sec 179 KB/sec 294 KB/sec 500
Port: 7255: 76 KB/sec 185 KB/sec 93 KB/sec 500
Port: 7003: 44 KB/sec 176 KB/sec 59 KB/sec 500
Port: 7003: 155 KB/sec 177 KB/sec 204 KB/sec 500
Port: 7202: 282 KB/sec 114 KB/sec 328 KB/sec 500
Port: 7202: 182 KB/sec 131 KB/sec 216 KB/sec 500
Port: 7499: 189 KB/sec 123 KB/sec 211 KB/sec 500
Port: 7499: 115 KB/sec 123 KB/sec 138 KB/sec 500
Port: 80: 57 KB/sec 142 KB/sec 73 KB/sec 500
Idle NIC bandwidth Send: 150 KB/sec Recv: 15 KB/sec
TIA for any advice on resolving a dead game.Its baaaack… same problem… Ta’al out.
D/L and installed STO game client for the 3rd time in 24 hours and I am optimistic in the first few minutes of play as it seems this time everything is ok. Stay tuned.
edit: tried any and all solutions I’d found including enabling port forwarding which I left enabled with the new install though it works now either way. So far so good, all windows are loading data and haven’t had any rubberbanding
@Latinumbar wrote:
did you try a force verify of files?
Force verify, tried the proxy, downloaded and reinstalled the entire program as well.
@mrbruce1970 wrote:
This issue was talked about on the STO forums and some users with ASUS motherboards reported that updating their ethernet drivers resolved the issue.
Not an ASUS but updated anyway, no joy.
This morning, it disconnects just after toon selection. 😐
-
AuthorPosts
